Wall safes and free standing safes | Viro S.p.A. A SOCIO UNICO

Viro Home \ Hardware Products \ Safes and safety cabinets \ "RAM-TOUCH II" safes with digital fingerprint reader and electronic combination\ The advanced features of "RAM-...\ Wall safes and free standing s...

  This site uses cookies to improve services and user experience. Take vision of extended use of cookies by clicking here. By keeping on browsing you accept their use OK close  

Category:

Safes and safety cabinets

Family:
The advanced features of "RAM-TOUCH II" safes
Wall safes and free standing safes

MECHANICAL FEATURES:

  • Case: 2 mm (for wall versions) or 3 mm thick steel (for free standing versions). Pre-drilled fixing holes (only for free standing versions): 4 on the back and 4 on the bottom, Ø 9.5 mm, for installation with expansion plugs in a cabinet or in the wall.
  • Fins: (only for wall versions): "L" shaped folded fins on all rear sides, to increase resistance to attack.
  • Frame: 12 mm thick steel. Specially rebated steel around the entire frame perimeter to increase resistance to attack. The frame forms a one-piece body with the case, thanks to the sturdy welding around the entire perimeter.
  • Door: 10 mm thick steel, banded on the hinge side for better pullresistance. Minimum space between door and frame to prevent insertion of burglary tools. Knob and fingerprint reader lined up with the door allow to hide the safe easily behind a picture or a a piece of furniture.
  • Hinges: reinforced in 20 mm steel, fixed with Ø 8 mm steel pins.
  • Dead-bolts: horizontal rotating resistant to attack and vertical (when present) nickel-plated steel, all with double guides, Ø 20 mm.
  • Thumb turn: non-slip ABS with programmed breakage steel shaft: if forced, the thumb turn will break before the mechanism, leaving no space for access by burglary tools.
  • Mechanism:
    • all steel internal components, without plastic parts, to ensure maximum resistance to attack;
    • electromagnet (activator) enclosed in a sturdy brass cover plate with anti-drill elements;
    • reduced length connecting cables inserted into small cross-section holes to prevent access to the mechanism from the outside;
    • optical open/close control sensor of the door (unlike traditional models, it is not subject to mechanical wear);
    • fingerprint reader placed in a track, which aloows a better fingerprint reading;
    • emergency cylinder protected by burglarresistant and anti-drill case-hardened and tempered steel plate; 2 patented profile emergency keys (form trademark), that can only be duplicated by Viro, sending a fax or an e-mail with a photo of the ownership card supplied in a sealed envelope with the keys;
    • 1.5 mm thick manganese plate for protecting electronics.
    • high brightness LED: for internal lighting when opening (inside lighting to be deactiveted from menu).

ELECTRONIC FEATURES:

  • Power supply: low consumption technology (4 alkaline 1.5 Volt batteries) to extend battery life to a maximum.
  • Electronic board: protected against break-in attempts by high voltage electric shocks and against incorrectly inserted batteries (the electronic boards of most safes on the market are seriously damaged by incorrect battery insertion).
  • Connectors: optimized number to maximize board reliability.
  • Non-volatile memory: stored codes and data are not erased if the batteries are removed.
  • Illuminated display: for perfect visibility even in rather dark rooms (lighting adjustable by the user).
  • Function menu: easy to use with instructions displayed as on a mobile telephone (Languages Italian, English, Spanish, French and Russian, selected by the user).
  • Capacitative keypad: it allows the system to be activated simply by touching the keys. The lack of physical keys avoids the risk of breakage over time. Keyboard and acustic signals (to be deactiveted by the user) make it easy and intuitive to use.
  • Combinations: accepts up to 16 codes from 3 to 10 digits (10 billion possible combinations). The code can only be changed when the door is open, using the function menu.
  • Fingerprint memorizing: up to 16 fingerprints including the Master, which controls the management of the others.
  • Opening delay (break-in-proof): the time delay time can be set by the user (maximum delay 255 minutes).
  • Silent alarm: set up for connection to a burglar alarm. For real time warning, if the safe is opened with a memorized fingerprint but under constraint.
  • Vibration alarm: set up for connection of the safe electronic board to a domestic alarm system; if the safe is forced, the alarm will activate.
  • Electronic block-out: after 5 consecutive error codes (block lasting 15 min.)
  •  

  • Supplied with:
    • 1 mm thick painted steel removable shelf;
    • USB memory disk containing operating instructions and video.
  • Packaging: personalized single box.
  • On request (photos and details of the accessories):
    • inside lighting module: that lights up when the safety box is opened for easy identification of small items inside the safety box (may also be ordered after the purchase of the safe).
"RAM-TOUCH II" horizontal electronic wall versions. "RAM-TOUCH II" electronic free standing versions.